THINKSCAN PLUS S7

• ThinkScan Plus S7 Support 7 System Diagnostic ECM/TCM/ABS/SRS/BCM/AC/IC, lifetime free
• Choose 5 Reset Services from 28 Reset Services, lifetime free
• Support Full OBD2 Diagnostic Functions
• No subscription fees for device updates
• Wide vehicle coverage. cover up to 94 major vehicle manufacturers, more models are updating
• Supports 10 languages: English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish and Turkish
• Support AutoAurth for FCA SGW (Need to buy FCA SGWA account)

ThinkScan Plus S7 supports 7 systems (ABS/SRS/ECM/TCM/BCM/AC/IC) + choose 5 optional resets from 28 reset lifetime free use and update for all cars.
ThinkScan Plus S6 supports 4 system diagnosis(ABS/SRS/ECM/TCM/)+5 fixed reset functions(SAS/OIL/EPB/TPMS/ETS) lifetime free use and update for all cars.
ThinkScan Plus S5 supports 4 system diagnosis(ABS/SRS/ECM/TCM/).
ThinkScan Plus S4 supports 5 systems (ABS/SRS/ECM/TCM/BCM) +choose 3 optional resets from 28 resets as lifetime free use and update for all cars.

ThinkScan Plus S7 supports 5 reset services, which choose from 28 reset services, free use and update for life.
Oil Lamp reset service: allows to reset the oil service light or oil change reminder on your vehicle after an oil change has been performed.

• EPB (Electronic Park Brake) reset service: allows to reset the EPB system after performing maintenance or repairs on the brake system. It ensures that the EPB system is properly calibrated and functioning correctly.
• BAT battery service: typically used when there is a need to clear fault codes related to the battery system or to perform a battery reset after replacing the battery. It helps to ensure proper functioning and optimal performance of the vehicle's battery.
• DPF (Diesel Particulate Filter) reset service: allows to regenerate or reset the DPF system in vehicles that have a diesel particulate filter. It helps to clear any accumulated soot or ash in the filter and restore its proper functioning.
• SAS (Steering Angle Sensor) reset service: allows to re-calibrate the steering angle sensor, which is important for the proper functioning of various safety systems such as stability control and lane departure warning.
• TPMS (Tire Pressure Monitoring System) reset service: allows to reset the TPMS system in your vehicle, which is useful when replacing or rotating tires.
• IMMO (Immobilizer) reset service: reset the immobilizer system and allow for reprogramming or synchronization of the keys.it is mainly used to disable the lost vehicle keys and program a new replacement key fob.
• ABS Bleeding reset service: expel air from the braking system. Ensure smooth flow of brake fluid throughout the system, eliminating air bubbles in the braking system and improving braking effectiveness and stability.
• Sunroof Reset service: The sunroof needs to be reset when the sunroof control unit has a communication problem or changes.
• Suspension reset service: allows to recalibrate or reinitialize the suspension components, such as the air suspension or electronic dampers, to their default settings. Ensures that the suspension system operates correctly and optimally.
• Gearbox (Transmission )Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
• AFS Headlamp: Reset 'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels on either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
• Injector Coding: Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
• Throttle Adaptation: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronic fuel-injected car, a throttle position sensor and airflow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning the throttle sensor position after clearing or repair.
• Gear Learning: The scan tool monitors certain camshaft position sensor signals to determine if all conditions are met to continue with the procedure for the Engine running.
• EGR Reset: Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
• A/F Reset: This function is applied to set or learn Air/Fuel ratio parameters.
• Adblue Reset (Diesel Engine Exhaust Gas Filter): After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
• Airbag Reset: This function resets the airbag data to clear the airbag collision fault indicator.
• Coolant Bleeding: Use this function to activate the electronic water pump before venting the cooling system.
• AT Learning: This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problems. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions to achieve a more comfortable and better shift
• Language Change: This function is used to change the system language of the vehicle central control panel.
• Nox Sensor Reset: Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
• ODO Reset: ODO reset is to copy, write, or rewrite the value of kilometers in the chip of the odometer by using a car diagnostic computer and data cable so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do an ODO reset after maintenance.
• Stop/Start Reset: This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and is supported by hardware).
• Seat Calibration: This function is applied to match the seats with memory functions that are replaced and repaired.
• Transport Mode: ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
• Windows Calibration: This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of the power window.

• Read extensive current, pending, and permanent codes in the OBD system quickly
• Clear detected fault codes and turn off the Check Engine Light efficiently
• View graphical live data of vehicle's computer module(s) for easy analyses
• View the vehicle's operating parameters at the moment a DTC is detected
• Read I/M readiness status to have a vehicle inspected for state emissions compliance
• Perform O2 sensor test to check fuel efficiency and vehicle emissions
• Read the results of on-board diagnostic monitoring tests for specific components/systems
• Perform the component Test by initiating a leak test for the vehicle's EVAP system
• Retrieve the vehicle information of VIN, CINs, and CVNs completely
• Built-in DTC lookup library with cause analysis

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish and Turkish.

AUTO VIN Scan
Quickly accurately diagnose the vehicle's state.

4 In 1 Live Data Stream Graph & Playback
You can select the data stream you need from "Long/Short Term Fuel Trim" "Vehicle Speed Sensor" "O2 Sensor Output Voltage" "Engine RPM" etc. to show the live data stream.